Category Archives: Instagram

@fitbikeco Blade V.3 in stock now!

The goal was to design and produce an extremely strong fork with plenty of tire clearance. After 2 years of R&D and a lot of investment in tooling, the Blade V.3 is available with a traditional 33mm offset. Here are a few features that make these forks so strong.
Using left and right specific investment cast drop-outs instead of traditional Cr-Mo plate, we’ve eliminated the weld gap on the inside of the drops, and were able to thicken up the drops toward the top making a much stronger drop-out/leg connection.
Seamless, swaged legs provide more strength than welded or fused caps-especially if pegs are installed. The ends of these legs are formed, not capped and welded so there is nothing to fracture.
A longer 166mm CNC’d steerer tube with increased wall thicknesses wherever possible and a 24mm x 1.5 compression cap with integrated race.
Tapered and butted legs provide tons of strength, crown weld surface, and peg clearance.
Post weld 4Q Baked heat-treatment

Begin Frame

Brandon Begin’s new Fit frame is here. One hundred percent American-made, the Scumbag 7 Series is carefully crafted from Vari-Wall THERMLX tubing and features a short rear-end, thick drop outs and angled Thread-On brake mounts for a straighter cable pull. With its 9″ stand-over, slightly taller 11.8″ BB for crank-arm grinds and more predictable 75.3° head angle, Brandon Begin’s Scumbag 7 Series frame pairs beautifully with 7up-inspired BEGIN 4PC bars. Order today for a pairing that goes down smooth in the streets.

TOP TUBE LENGTH 20.5″,20.75″,21″
REAR END LENGTH 12.7″-13.1″
HEAD TUBE ANGLE 75.3°
STANDOVER HEIGHT 9″
B.B. HEIGHT 11.8″
SEAT TUBE ANGLE 71°
HEAD TUBE Integrated
B.B. STYLE Mid
BRAKE MOUNTS Thread-On angled 5° (sold separately)
DROPOUTS 14mm, 4Q-Baked
SEAT POST SIZE 25.4mm
WEIGHT 4.75 lbs. / 2.16 kgs.

Wango Hango

Looking for a shorter stem? Well,the 48mm Hango is for you.
Jordan Hango Signature Stem. Made in USA. #fitbikeco #buildingdistro